Tools Hand | ELECTROCONDUCTIVITY (EC) brand Milwaukee model MW302
Location
Villa Belén
Published
23/06/2024
New or Used
New
Details
The EC MW302 meter is a portable EC meter. The EC MW302 meter comes with a probe with 1 meter cable, a 9V battery.
The EC MW302 meter is indicated for field measurements. The EC MW302 meter is ideal for sectors such as hydropony, agriculture, aquariums, fish farming, water treatment, laboratories, education.
The EC MW302 meter has a scale of 0.0 up to 10.0 mS/cm; A precision of 0.1 mS/cm. Functioning of the EC MW302 Meter The Meter is delivered complete, with a 9V battery. Open the battery compartment cover at the back.
Include the battery respecting good polarity. Connect the lance to the plug located above the meter. Make sure the meter was calibrated before use. Dip the head of the EC/TDS spear into the liquid envelope provided (4 cm) in the liquid supplied.
Preferably, use a plastic container to avoid EMC interference.
Turn on the meter by pressing the ON/OFF button Before you measure, wait a few seconds for the sensor to capture the ambient temperature, After use, the meter should be shut down, clean and dry the sensor from the spear. To clean better, alcohol can be used.
EC MW302 Meter Calibration Cleans the sensor with alcohol and lets dry Opens an EC 1413 calibration liquid envelope and submerges the sensor (assure that the 2 metal poles are submerged) Wait a few seconds for the sensor to capture the ambient temperature.
Adjust the data to the back of the meter with the screwdriver provided up to 1.4 mS/cm The gauge is calibrated and ready to measure. It is advisable to calibrate the meter at least once a month, or after a long unused season or after a change of spear.
Change Battery of the EC MW302 Meter As soon as the battery is exhausted, the meter display communicates the “V” value. From this moment on, the battery can only provide about 50 hours of operation to the meter. A low battery provides random data. It is recommended to change it. Battery change can only be made in a safe (non-hazardous) location and by placing a 9V Alcalina battery. Turn off the meter, lock the battery in your compartment.
Make sure the poles keep in touch with the battery and collect the lid.
The EC MW302 meter is indicated for field measurements. The EC MW302 meter is ideal for sectors such as hydropony, agriculture, aquariums, fish farming, water treatment, laboratories, education.
The EC MW302 meter has a scale of 0.0 up to 10.0 mS/cm; A precision of 0.1 mS/cm. Functioning of the EC MW302 Meter The Meter is delivered complete, with a 9V battery. Open the battery compartment cover at the back.
Include the battery respecting good polarity. Connect the lance to the plug located above the meter. Make sure the meter was calibrated before use. Dip the head of the EC/TDS spear into the liquid envelope provided (4 cm) in the liquid supplied.
Preferably, use a plastic container to avoid EMC interference.
Turn on the meter by pressing the ON/OFF button Before you measure, wait a few seconds for the sensor to capture the ambient temperature, After use, the meter should be shut down, clean and dry the sensor from the spear. To clean better, alcohol can be used.
EC MW302 Meter Calibration Cleans the sensor with alcohol and lets dry Opens an EC 1413 calibration liquid envelope and submerges the sensor (assure that the 2 metal poles are submerged) Wait a few seconds for the sensor to capture the ambient temperature.
Adjust the data to the back of the meter with the screwdriver provided up to 1.4 mS/cm The gauge is calibrated and ready to measure. It is advisable to calibrate the meter at least once a month, or after a long unused season or after a change of spear.
Change Battery of the EC MW302 Meter As soon as the battery is exhausted, the meter display communicates the “V” value. From this moment on, the battery can only provide about 50 hours of operation to the meter. A low battery provides random data. It is recommended to change it. Battery change can only be made in a safe (non-hazardous) location and by placing a 9V Alcalina battery. Turn off the meter, lock the battery in your compartment.
Make sure the poles keep in touch with the battery and collect the lid.