Building | SE VENDE: Interruptor de flotador de correa - 3PWZ8 / 20PMDWOP (MOTOR)
Location
Villa Belén
Published
19/03/2024
New or Used
New
Details
Technical specifications:
Article - Floating switch, mechanic.
Amperios - 13A.
Mounting material - ABS / nylon.
Max. Liquid temperature - 140 degrees F.
Floating material - POLIVINILOL CLORURE.
To use with - Pumps.
Includes - Assembly clamp set.
Agency compliance - UL, CSA, water quality.
CHARACTERISTICS
SJE Rhombus PumpMaster Floating Switch
This mechanically activated wide-angle switch is designed for direct control of pumps up to 1/2 HP to 120 VCA or up to 1 HP to 230 VCA. The SJE PumpMaster pump switch is not sensitive to rotation or turbulence, allowing its use in both quiet and turbulent applications.
Applications
Normally open to pump or empty in:
water not drinking water
Waste water
Features
To use with 50/60 Hz monophase pumps of up to 1/2 HP to 120 VCA or up to 1 HP to 230 VCA within the specified amperage classifications below:
Maximum operating current of the 13 amper pump
Maximum pump start current of 85 amper
Heavy service contacts
7 to 36 inch adjustable pumping range
Floating dimensions (3.05 stranger " in diameter x 3,56 long).
The float is made of a corrosion-resistant and high-impact PVC housing for use in wastewater and water up to 140 °F
The cable is flexible calibre 16, 2 conductors (UL, CSA) SJOW, waterproof (CPE)
Includes standard mounting clamp and box packing
Recognized by UL for use in water and wastewater
Certificate CSA
Note: This switch should be used with pumps that provide protection against integral thermal overload.
Article - Floating switch, mechanic.
Amperios - 13A.
Mounting material - ABS / nylon.
Max. Liquid temperature - 140 degrees F.
Floating material - POLIVINILOL CLORURE.
To use with - Pumps.
Includes - Assembly clamp set.
Agency compliance - UL, CSA, water quality.
CHARACTERISTICS
SJE Rhombus PumpMaster Floating Switch
This mechanically activated wide-angle switch is designed for direct control of pumps up to 1/2 HP to 120 VCA or up to 1 HP to 230 VCA. The SJE PumpMaster pump switch is not sensitive to rotation or turbulence, allowing its use in both quiet and turbulent applications.
Applications
Normally open to pump or empty in:
water not drinking water
Waste water
Features
To use with 50/60 Hz monophase pumps of up to 1/2 HP to 120 VCA or up to 1 HP to 230 VCA within the specified amperage classifications below:
Maximum operating current of the 13 amper pump
Maximum pump start current of 85 amper
Heavy service contacts
7 to 36 inch adjustable pumping range
Floating dimensions (3.05 stranger " in diameter x 3,56 long).
The float is made of a corrosion-resistant and high-impact PVC housing for use in wastewater and water up to 140 °F
The cable is flexible calibre 16, 2 conductors (UL, CSA) SJOW, waterproof (CPE)
Includes standard mounting clamp and box packing
Recognized by UL for use in water and wastewater
Certificate CSA
Note: This switch should be used with pumps that provide protection against integral thermal overload.
Sale reason
liquidacion